Shackle Reversal & 4" HFS Lift Combo
Lift Kit - FJ40x HFS Extreme - 1961-7/80 - Suspension Correction Lift Kit
Finally, a lift spring kit to fit 40/42 Series with existing solid front shackles. This kit is for trucks that already have suspension correction front Reversal Spring Hangers installed. 2ea. Front HFS lift springs have 2.5" of lift. 2ea. Rear HFS Extreme lift springs have 4" of lift. This HFS spring combination will greatly counter the unlevel vehicle effect (high in front / low in rear) caused by the shackle reversal of the Suspension Correction Kit. HFS Suspension Correction Lift Spring kits fit FJ40 & BJ40/42. Lift height may vary depending on set-up. All HFS Springs have stock spring eyes diameter, bushing size and pin diameter. HFS Lift Springs are "Softer" riding than any other FJ40 Lift Spring.
(2ea) CCOT-HFS-40XR Rear Leaf Springs (4" Lift Springs)
(2ea) HFS4055875 HFS Front Shocks w/ Boots
(2ea) HFS4055620 HFS Rear Shocks w/ Boots
(8) U-Bolts - Yellow Zinc w/Nuts & Washers, Front & Rear Axles
(24) Bushings HFS Poly - 24ea - 40 Series - same as used in our extreme and designer kits
 |
Want even more Lift? Install HFS Lift Shackles... a great looking accessory that adds more Lift if needed ~ HFS Shackles come in 1.5" and 2.5" heights... "HFS Leveler Block Pre-Installed on Passenger-side (right) Spring:" Cure the Driver's Side Lean of most FJ40s. CCOT designed and extensively tested our HFS Leveler Block FORMULA on many FJ40s. We found that our HFS Leveler Block cured the lean on all test vehicles. Block is pre-installed on top of the rear passenger's side spring stack. The "Leveler Block" is an exclusive CCOT product. See "Toyota Trails" Article featuring CCOT's HFS™ Lift.
Mount Rear Springs with long side away from axle toward the rear of the vehicle.
HFS Springs are "Lift Springs" not "Overload Springs".
Temporarily out of stock ~ not available
http://coolfj40.stores.yahoo.netlikitfjhfsex.html
$1,409.65
Lift Kit - FJ40x HFS Extreme - 1961-7/80 - Suspension Correction Lift Kit
Product Description
Finally, a lift spring kit to fit 40/42 Series with existing solid front shackles.
This kit is for trucks that already have suspension correction front Reversal Spring Hangers installed.
2ea. Front HFS lift springs have 2.5" of lift.
2ea. Rear HFS Extreme lift springs have 4" of lift.
This HFS spring combination will greatly counter the unlevel vehicle effect (high in front / low in rear) caused by the shackle reversal of the Suspension Correction Kit.
HFS Suspension Correction Lift Spring kits fit FJ40 & BJ40/42. Lift height may vary depending on set-up.
All HFS Springs have stock spring eyes diameter, bushing size and pin diameter.
HFS Lift Springs are "Softer" riding than any other FJ40 Lift Spring.
Lift Kit Includes:
(2ea) CCOT-HFS-40F Front Leaf Springs (2.5" Lift Springs)
(2ea) CCOT-HFS-40XR Rear Leaf Springs (4" Lift Springs)
(2ea) HFS4055875 HFS Front Shocks w/ Boots
(2ea) HFS4055620 HFS Rear Shocks w/ BootsShocks require use of your old pins
(8) U-Bolts - Yellow Zinc w/Nuts & Washers, Front & Rear Axles
(24) Bushings HFS Poly - 24ea - 40 Series - same as used in our extreme and designer kits
Solid front shackle not included. See Complete Shackle Reversal Kit
"HFS" Spring Features, Click
Want even more Lift? Install HFS Lift Shackles... a great looking accessory that adds more Lift if needed ~ HFS Shackles come in 1.5" and 2.5" heights...
"HFS Leveler Block Pre-Installed on Passenger-side (right) Spring:" Cure the Driver's Side Lean of most FJ40s. CCOT designed and extensively tested our HFS Leveler Block FORMULA on many FJ40s. We found that our HFS Leveler Block cured the lean on all test vehicles. Block is pre-installed on top of the rear passenger's side spring stack. The "Leveler Block" is an exclusive CCOT product.
See "Toyota Trails" Article featuring CCOT's HFS™ Lift.
"HFS" & "BDS" Spring Installation Instructions, Click
View "Hell for Stout" Spring Warranty, Click
Mount Rear Springs with long side away from axle toward the rear of the vehicle.
HFS Springs are "Lift Springs" not "Overload Springs".
This kit is for trucks that already have suspension correction front Reversal Spring Hangers installed.
2ea. Front HFS lift springs have 2.5" of lift.
2ea. Rear HFS Extreme lift springs have 4" of lift.
This HFS spring combination will greatly counter the unlevel vehicle effect (high in front / low in rear) caused by the shackle reversal of the Suspension Correction Kit.
HFS Suspension Correction Lift Spring kits fit FJ40 & BJ40/42. Lift height may vary depending on set-up.
All HFS Springs have stock spring eyes diameter, bushing size and pin diameter.
HFS Lift Springs are "Softer" riding than any other FJ40 Lift Spring.
(2ea) CCOT-HFS-40XR Rear Leaf Springs (4" Lift Springs)
(2ea) HFS4055875 HFS Front Shocks w/ Boots
(2ea) HFS4055620 HFS Rear Shocks w/ Boots
(8) U-Bolts - Yellow Zinc w/Nuts & Washers, Front & Rear Axles
(24) Bushings HFS Poly - 24ea - 40 Series - same as used in our extreme and designer kits
| |
Want even more Lift? Install HFS Lift Shackles... a great looking accessory that adds more Lift if needed ~ HFS Shackles come in 1.5" and 2.5" heights...
"HFS Leveler Block Pre-Installed on Passenger-side (right) Spring:" Cure the Driver's Side Lean of most FJ40s. CCOT designed and extensively tested our HFS Leveler Block FORMULA on many FJ40s. We found that our HFS Leveler Block cured the lean on all test vehicles. Block is pre-installed on top of the rear passenger's side spring stack. The "Leveler Block" is an exclusive CCOT product.
See "Toyota Trails" Article featuring CCOT's HFS™ Lift.
Mount Rear Springs with long side away from axle toward the rear of the vehicle.
HFS Springs are "Lift Springs" not "Overload Springs".
Temporarily out of stock ~ not available
